New Home & Garden Equipment
Select Product or Task
John Deere - 3025E
Clean and simple operator’s station An uncluttered design gives operators of all sizes plenty of room to be comfortable. Color-coded controls are located on either side of the operator.Hydrostatic transmission (HST) and brake pedals are designed and located for maximum comfort and ease of use.Contoured, comfortable seat enhances operator comfort.Seat position adjusts fore and aftSeat flips forward for protection from the elements.Flat operator platform provides for easy entry to/exit from the tractor.Folding Roll-Gard™ rollover protective structure (ROPS) and retractable seat belt increase operator safety.Operator presence system:If the operator leaves the seat when the tractor is in gear, the engine shuts downIf the operator leaves the seat when the power take-off (PTO) is engaged, the engine shuts downLeft-side stepLeft-side step for easy entry/exitThe left-side step allows for easy access on and off the tractor.Foot platform has a non-skid surface for sure footing.SeatThe thick, soft padding on this seat provides a smooth and comfortable ride.Seat flips forward for protection from the elements.Adjustable using the fore and aft lever located under the seat, the seat slides on ramped rails to provide comfortable access to all controls.InstrumentationInstrument panelEasy-to-read instrument panel includes the following:TachometerLow oil pressure indicator lightBattery discharge indicator lightPTO engagement indicator lightSignal/hazard lamp indicator lightsMulti-function liquid crystal display (LCD) display (hours, filter cleaning information, etc.)Filter cleaning status indicator lightFuel gaugeFuel gaugeAll 3E Series Tractors come standard with a fuel gauge that is easy to read from the operator’s station, to ensure operators do not run out of fuel.SafetyOperator presence switch (OPS) in seat:OPS requires the operator to be in the seat to operate the transmission or PTO.ROPS is designed to meet or exceed American Society of Agricultural and Biological Engineers (ASABE) safety standards.Reflective ROPS strips for better tractor visibility.Seat belts are in base equipment on all John Deere compact utility tractors.Key switch interlock prevents bypass starting.Visual PTO warning light on the instrument panel alerts the operator when the PTO is running.Turn signal and flashing warning lights operate according to ASABE standards.Slow-moving vehicle (SMV) sign is provided for road transport.Park brakePark brakeAutomotive hand-style park brake for easy on/off.Instrument panel has an indicator light for the park brake.2-post Roll-Gard ROPSRoll-Gard ROPS3E Series Tractors are equipped with Roll-Gard ROPS. These folding ROPS meet the ASABE standards for compact utility tractors.Overall height is 244.3 cm (96.2 in.) with R3 tires, 242.1 cm (95.3 in.) with R4 tires, 244.6 cm (96.3 in.) with larger R4 tires, and 244.9 cm (96.4 in.) with R1 tires. With the Roll-Gard ROPS folded down, producers can easily to get their tractor into a garage with a standard 2.1-m (7-ft) garage door.NOTE: The use of seat belts is recommended at all times when operating the 3E Series Tractor with folding ROPS. An optional canopy is available to help protect the operator from the elements.
John Deere - 3032E
The 3E Tractors are available with a two-range hydrostatic transmission (HST) incorporated in a die-cast aluminum transmission case. Fluid under pressure transmits engine power to the drive wheels via a closed-loop pump and motor arrangement. Infinite ground speeds allow the operator to match the speed of the tractor to the job.No clutching for fast and easy direction changesTwin Touch™ foot pedals for quick and easy forward/reverse operationTransmission oil cooler cools transmission oil for longer transmission lifeSafety features of the HST include:The tractor will only start with the range lever in neutralThe engine will shut off if the operator leaves the seat unless the range lever is in neutralThe engine will shut off if the operator leaves the seat and the power take-off (PTO) is engagedTwin Touch™ foot controlsTwin Touch foot controlsKey John Deere advantage – John Deere’s Twin Touch foot controls offer several key advantages over competitive HST models tractors.Some competitive hydrostatic tractors use a treadle pedal (toe-heel) design foot control for operation of the HSTRequires the operator to use both toe and heel to change direction, resulting in increased operator fatigueThe Twin Touch configuration also makes it easier to “inch” the tractor forward or rearward (i.e. when attaching to implements)Optional cruise controlOptional cruise controlThe 3E Series Tractors can be outfitted with an optional cruise control switch that is installed on the right-hand control console. This gives operators the ability to keep a constant speed when in transportation, field mowing, or other applications where extended use of the transmission is needed. This kit is very quick and easy to install for those who desire this feature.Integrated hydrostatic pump and motorSauer-Danfoss® company provides the integrated pump and motor; this assures that the components are matched to each other, providing maximum efficiencyReduces powertrain shock loadsProvides strength and durability needed for operating such attachments as loadersOne reservoir (with one check point and fill point) for the transmission, differential, and hydraulic system speeds up daily maintenanceMechanically actuated by Twin Touch foot pedals allow selecting both directions of travel and speed with the touch of a toeTransmission reservoir fluid checkpointTransmission reservoir fluid checkpoint (A)Easy-to-reach transmission fluid dipstick allows for frequent checks of the transmission fluid levelTransmission fill pointTransmission fill pointEasy-to-reach transmission fill point (A) located on top of rear axles on the right-hand side.Integrated brake and differential lock pedal Integrated brake and differential lock pedal Foot-actuated differential lock is integrated into the brake pedal to simplify operator controls; the differential lock is included as base equipment to assist traction in tough spotsPress the brake pedal down half way to engage the differential lock that locks the rear axle for improved traction in tough spots Sauer-Danfoss is a trademark of Sauer-Danfoss Incorporated.
John Deere - 2038R
eThrottle switchThe 2032R and 2038R Tractors come equipped with the eThrottle feature. This feature is designed to make the tractor quieter and use less fuel. With eThrottle engaged, the engine rpm and transmission speed will increase as the Twin Touch™ pedals are depressed. This feature can be beneficial for use in many different applications, especially for front loader work and when transporting on roads or in parking lots. To enable the system, producers press the switch located on the right side of the front console. Once the system is enabled, engine speed will then increase or decrease in unison as the Twin Touch transmission pedals are depressed. For loader work, producers will get maximum benefit from the system by increasing engine rpm with the hand throttle to at least 50 percent. Once the hand throttle is set, eThrottle will help provide the feeling of a power boost when the producer is filling the bucket with material from a pile. The harder the Twin Touch pedal is pressed, the more engine speed available. In this scenario, as the producer presses the pedal, the engine will operate between 50 percent throttle and 100 percent throttle. It will not go below 50 percent until the hand throttle is lowered back down. For transport applications, it is recommended to engage eThrottle but leave the hand throttle set to low idle so that eThrottle can control the entire range of engine speed from 0 percent up to 100 percent. In power take-off (PTO) applications such as mowing or snow blowing, eThrottle is not recommended because PTO implements usually require a constant speed in order to properly function.
John Deere - 2032R
Regular service and maintenance are essential to the performance, productivity, and longevity of the tractor.Tractors are equipped with extensive onboard self-diagnostic capabilities and are fully compatible with the John Deere-exclusive ServiceADVISOR™ system. Four quarter turn fasteners allow operators to easily remove the engine side panels without tools to access to the engine compartment.Quarter turn fastenersRight tractor side panel removedEasy access to regular service points minimizes service timeDaily service checks, such as checking the engine oil or water separator, can be done without opening the hood or removing the tractor side panelsTractors are equipped with an electronic air filter restriction indicator that alerts the operator when the air filter needs to be cleaned or changedAir filter restriction sensorDaily service requirements are minimal and simple to accomplish. Most service interval requirements can be performed with a basic understanding of procedures and common tools.All external engine, fuel and transmission filters are easily accessibleIncreased service intervals lessen overall cost of ownershipHydraulic oil service interval increased to 1200 hours when using Hy-Gard™ productsHydraulic oil filter will need to be changed every 400 hoursFuel tank is located on the rear of the tractor to allow for easy access when fuelingFuel TankGas-lift hood support eliminates the need for a mechanical prop rodGas-lift hood shocksAll items in the daily service schedule can be performed without the use of tools:Engine oil, hydraulic oil, coolant level, and the water separator can be conveniently accessedThe engine can be easily accessed by simply raising the hood for more periodic maintenance checks NOTE: Always refer to the operator’s manual for complete maintenance and service recommendations.
John Deere - 2025R
3-cylinder Yanmar TNV Series diesel enginePower is provided by a durable and efficient high-torque three-cylinder Yanmar® TNV Series diesel engine. This series of engines was developed to meet Tier 4 Environmental Protection Agency (EPA) environmental requirements by featuring low levels of both exhaust and emissions. ModelNumber of cylindersEngine displacementGross engine hpPower take-off (PTO) hp2025R31.267 L24.2 18.0Yanmar TNV Series engine offers these features:Economical for good cooling and long lifeIsolated engine provides reduced vibration and noise for the operator; indirect fuel injection uses a precombustion chamber to give the engine a smooth and quiet operation; aluminum-alloy piston with built-in steel struts are lightweight to reduce connection rod bearing loads and provide good heat transfer characteristicsDesign permits tighter tolerances and neutralizes expansion of the piston, thereby reducing blow-by gas and less noise from the piston slapHigher top rings on the piston and a thinner head gasket greatly reduces the volume of unburned waste gases and increases combustion efficiencyTiming-gear teeth have a designed roll-off profile giving almost no clash,no noise, and no backlashHigh-torque reserve provides plenty of power under heavy load, yet retains excellent fuel economyEasy access to engine check and fill points on the right-hand side of the tractor by removing the side panelsFuel filter with replaceable elementFull-pressure lubrication system provides filtered oil under pressure to all vital engine partsGlow plugs provide quick starts in temperatures down to 18°C (0°F) (Optional engine coolant heater attachment will assist starting under more extreme conditions.)Auto-bleed fuel system means there is no special bleeding required if the tractor runs out of fuel; this system will self-prime the injection pump, lines, and injectors, providing fast fuel recoveryKey start and shut off eliminates fuel shut-off knobElectric solenoid shuts fuel supply off immediately when key is turned offSee-through coolant recovery tank permits operator to check coolant level without removing radiator capDry-type air cleaner with safety element keeps dirt and other contaminants out of the engineSafety element (second filter) will protect engine if primary filter would develop a leakProtects engine when servicing primary filterAir filter restriction indicator is standard equipment on the 2025R TractorSealed-radiator compartment keeps trash and debris on outside of hoodHorizontal exhaust discharges fumes away from the operator station, reducing noise and improving operator visibility and comfortYanmar is a trademark of Yanmar Company Limited.