fbpx

John Deere - 1550
Call for price
John Deere - 1550

John Deere Front Mowers are commercial-quality mowing products that are ideal for the large-area commercial/institutional, golf and turf markets.

  • This field is for validation purposes and should be left unchanged.
  • Diesel engine has high-quality features to minimize operating cost

    Hood open for access to engine3-cylinder, liquid-cooled diesel engineThe 1500 Series TerrainCut Front Mowers are powered by liquid-cooled, 3-cylinder diesel engines.These engines feature low levels of exhaust and emissions, reduced noise levels, and excellent fuel economy. They also meet the necessary Environmental Protection Agency (EPA) Tier 4 emissions requirements.Models 1570, 1575, 1580, and 1585 are biodiesel compatible from the factory up to B20. Model 1550 requires an optional kit to be compatible with B20 biodiesel fuel.Engine drawing for 1570, 1575, 1580, 1585 shown 15501570, 1575, 1580, 1585FuelDiesel (optional kit permits B20 compatibility)Diesel (B20 compatible)Power       Gross at maximum rpm24.2 hp (17.8 kW), PS37.4 hp (27.5 kW), PS     Net——Displacement77 cu in. (1.262 L)100.2 cu in. (1.642 L)Maximum torque——Key features of the engine include:Economical cast-in block cylinder design for good cooling and long lifeIndirect fuel injection (model 1550)Direct fuel injection (model 1570, 1575, 1580, 1585) Injects fuel directly on top of pistons for more efficient combustionDelivers more horsepower per gallon of fuelImproves startingDevelops more horsepower per gallon of fuel; improves startingAluminum alloy pistons with built-in steel struts are lightweight to reduce connection rod bearing loads and provide good heat transfer characteristicsDesign permits tighter tolerances and neutralizes expansion of the piston, thereby reducing blow-by gas and noise from the piston slapHigher top rings on the piston and a thinner head gasket greatly reduce the volume of unburned waste gases and increase combustion efficiencyTiming gears and injector drive gears utilize helical profile gears to help lower engine noise; gear teeth have a newly designed roll-off profile, giving almost no clash, no noise, and no backlashFuel filter with replaceable elementFull-pressure intake manifold provides quick starts in temperatures down to 0°F (-18°C). (Optional engine coolant heater attachment will assist starting under more extreme conditions.)Auto-bleed fuel system; there is no need to prime the system if the tractor runs out of fuel; the system will self-prime the injection pump, lines and injectors, providing fast fuel recoveryKey start and shutoff eliminates fuel shut-off knob; electric solenoid shuts fuel supply off immediately when key is turned offSee-through coolant recovery tank permits operator to check coolant level without removing radiator capEnclosed engine compartment to keep out debris and lower sound levelsSealed radiator compartment to keep trash and debris on outside of hoodExcellent torque for plenty of lugging power when operating in tough mowing conditionsFull-pressure lubrication for positive lubrication, even when operating on slopesDual-element, dry-type, replaceable air cleaner completely sealed for effective cleaning90 percent to 95 percent of dirt ejected before it reaches the paper elementSecondary safety element for additional filteringProgressive-type air restriction indicator to let operator know when the filter needs servicingAutomotive-type alternator for plenty of charge to the battery and power for accessories 75 amp for open-station models95 amp for ComfortCab modelsAutomatic initiation of air heater for easier cold-weather startingAutomotive-sensing system tells operator when engine is ready to startRear-mounted radiators Rear-mounted radiators (1550, 1570, 1580)Rear-mounted radiators and air conditioner condenser (1575, 1585)

    Hydrostatic transmission and transaxle are heavy-duty to maximize uptime

    Kanzaki 30-cc transmissionA Kanzaki® 30-cc transmission is used for reliable operation. Durability features include the following:High-capacity hydrostatic transmission and heavy-duty transaxle maximize performance and uptime and minimize cost of maintenance. Charge pump is used to efficiently deliver oil to the transmission.Oil cooler helps maintain optimum transmission oil temperature for superior performance and longer transmission life in the most challenging operating conditions.Maximum forward top speed is 12 mph (19.3 km/h) on the 1550, 1570, and 1575 and 15 mph (24.1 km/h) on the 1580 and 1585.Self-bleeding design helps keep air out of the system.Kanzaki is a trademark of Kanzaki Kokyukoki Manufacturing Company.

    Two-function mechanical rear-wheel drive for optimum use of the four-wheel drive feature

    Mechanical rear-wheel drive axleMechanical rear-wheel drive is available as standard equipment (1575, 1580, 1585) or as a factory-installed option (1550, 1570):On-demand four-wheel drive automatically engages and disengages as needed.Constantly maximizes trimming abilityOffers better fuel economy than full-time four-wheel drive Provides better steering tire wear than full-time four-wheel drive Increases traction and trimming ability to allow a novice operator to mow like an expertWorks in the forward direction onlyFull-time four-wheel drive is on at all times.Can be engaged or disengaged on the goProvides maximum traction and flotation in poor conditionsWorks in reverse as well as the forward directionTwo-wheel drive position is available on 1580 and 1585 with two-speed transaxle.Disengages rear axle when transporting at high ground speeds

    Welded frame structure is made of high-strength steel

    High-strength, tubular steel frame The revolutionary tubular, high-strength welded steel frame provides durability and allows major components to be located lower in the machine:The design results in a lower center of gravity for better stability and traction on hillsides and slopes.Rollover protective structures (ROPS) are integral members of the frame.Durable designDurability features of the frame include:Heat-treated cast-iron axles with 1.24-in. (3.15-cm) kingpinsInternal wet-disk brakesHydraulic PTO clutch, with brakeProvides smooth engagement and long lifeHydrostatic oil coolerO-ring seal (ORS) hydraulic fittingsIntegrated, shaft-driven power take-off (PTO)Sealed relays and electrical connectorsHeavy-duty, dual hydraulic cylindersNodular cast-iron lift arm socketsCast-iron rear bumper

    Easy-to-operate controls maximize productivity

    1570 Front Mower mowing tall grass1550 Front MowerManeuverability:Turn radius of 13 in. (33 cm)Uncut circle of 28 in. (71.1 cm) with a 72-in. (183-cm) 7-Iron™ PRO mower deckDeck offset and pulled rearward Tail-follows-the-trail trimming capability with 72-in. (183-cm) side-discharge mower deckSteered wheels (tail) stay within the path (trail) cut by the mower deck, allowing maneuverability without the rear of the machine contacting mowing obstaclesOperator controlsMaster stop brake/directional foot pedalsHydrostatic power steering provides the following benefits:Makes it easy to turn the unit, for less operator fatigueAllows quick turns – two turns lock to lock – for excellent productivityThe steering console offers the following:ThrottleKey switchHeadlight switchlift and drive controls and lever for single-spool auxiliary hydraulic kit (1570 shown)Controls, including levers for double-spool auxiliary hydraulic Kit (1585 shown)Console information/warning lights include the following:HourmeterBattery discharge lightEngine oil pressureEngine coolant temperatureHydraulic oil over temperatureAir preheaterLightsPower take-off (PTO) operation indicationT4 display for monitoring performance (1570, 1575, 1580, 1585)1550 Front MowerTwo-pedal foot control:Allows operator to select speed and direction with just the touch of a toeKeeps both hands free for steering and operating controls Master stop brake (parking brake):Provides stopping power to both drive wheelsDisengages the power take-off (PTO)Disengages the optional cruise controlUsed also for a parking brakeIndividual turn-assist brakes and differential lockIndividual turn-assist brakes:Provides additional traction when operating on hillsidesIdeal for tight trimming situationsWork in conjunction with hydrostatic foot controls to stop or slow the unit for turnsDifferential lock:Locks both of the front drive wheels together for added tractionEasily engaged with the left footFour-wheel-drive leverDeck lift-control leverFour-wheel drive (4WD) control lever (standard on 1575, 1580, and 1585; factory-installed option on 1550 and 1570) The 4WD control lever:Allows the operator to select between on-demand or full-time four-wheel drive (4WD) on 1550, 1570, and 1575 models (factory-installed option on 1550 and 1570)Allows the operator to select between on-demand or full-time four-wheel drive (4WD) and full-time two-wheel drive (2WD) on 1580 and 1585 modelsElectronic cruise control (optional):Beneficial when mowing open areas or when transportingLift-control lever is conveniently located, within easy reach of the operator’s right hand.1585 shown with control levers for double-spool auxiliary hydraulic kitTwo-speed transaxle shift lever is standard on 1580 and 1585.Safety starting systemTerrainCut™ Front Mowers have an operator-presence system. To start the engine the following conditions must be met:Master brake must be depressed or the parking brake locked; the hydrostatic foot controls will then be in the neutral position.PTO must be disengagedIgnition key must be used.In addition, once the engine is running, an interlock automatically shuts the engine and PTO off if the operator leaves the seat. To keep the engine running, the operator must disengage the PTO and set the parking brake before dismounting.

    Mower decks for TerrainCut™ Front Mowers match a wide variety of needs

    Since 1998 the John Deere 7-Iron™ mower deck has demonstrated commercial quality, performance, and durability. The 7-Iron PRO, Fastback™, and V-Flex mower decks deliver an even higher-quality cut in even more diverse conditions.1580 Front Mower1585 Front MowerTerrainCut Commercial Mower Compatibility Mower Deck 1550157015751580158560-in. (152-cm) 7-Iron PRO Side-Discharge Mower DeckXXX*X*X*62-in. (157-cm) Fastback Rear-Discharge Mower DeckXXXXX72-in. (183-cm) 7-Iron PRO Side-Discharge Mower DeckXXXXX72-in. (183-cm) Fastback Rear-Discharge Mower DeckXXXXX72-in. (183-cm) 7-Iron V-Flex Side Discharge Mower Deck XXXXRear weights (R66949) are required based on machine configuration. Must also order TCB10303, rear weight mounting bracket.*Mower deck offset for trimming capability. Vehicle track width is 2 in. (5.1 cm) wider on the discharge side of deck. This may cause the tire to drive over uncut grass on discharge side of deck.NOTE: These mower decks will not retrofit to F900 Series or F1145 Front Mowers.Rotate for Service (RFS™)Mower deck showing RFS featureRotate for Service (RFS) feature provides access for cleaning and maintenance of the mower decks:The rotation angle will vary depending on deck size and power unit tire size.No tools are required to access belts.The underside of the mower deck is easy to access.Easy on/off design simplifies installing and removing mower decks.Top, greaseable spindles can be accessed without removing belt covers.The Rotate for Service position also reduces the length of the machine for trailering.CertificationTerrainCut Front Mowers comply with ANSI B71.4 safety certification.Heavy-duty blade spindlesCast-iron spindle housingCast-iron spindle housingThe mower spindle housings are made of ductile cast iron, except for the 72-in. (183-cm) 7-Iron V-Flex Side-Discharge Mower Deck, which has an aluminum center spindle housing and cast-iron gearboxes to drive the outer blades.Key benefits of ductile cast-iron spindle housings:Ductile cast-iron material provides superior impact strength.Gusseted design puts reinforcement where it is needed.Strength of cast iron protects against damage from blade impacts.Grease fitting is mounted at the top for easy access.Grease pressure-relief valve minimizes seal damage from overfilling with grease and keeps debris from entering housing.The 8-in. (20.3-cm) diameter housing distributes loads and impacts to minimize deck-shell damage.Spindle allows ability to be rebuilt.NOTE: The 72-in. (183-cm) 7-Iron V-Flex Side-Discharge Mower Deck has an aluminum center spindle housing. The outside blades are driven by cast-iron gearboxes.62-in. (157-cm) Fastback Mower Deck62-in. Fastback Mower DeckThe 62-in. (157-cm) Fastback rear-discharge mower is ideally suited for:Areas where people are presentSchoolsParksPlaygroundsTraffic areas (city boulevards, roadsides, etc.)Conditions and applications: Areas with long grass and weedsAreas where customer is not as concerned about having a wide dispersal of grass (park areas, roadsides, etc.)Government bids that specify a rear discharge mower. Key features of the 62-in. (157-cm) Rear-Discharge Mower Deck include: Mower deck is constructed of 7-gauge, 0.179-in. (4.6-mm) steel for the strength to stand up to the demanding use of commercial and municipal mowing applications.Blade spindle housings are made of ductile cast iron.Gusseted design puts reinforcement where it is needed.Deck is constructed with a patented baffling system that reduces clumping and windrowing andproduces a finished appearance that competitive rear-discharge mowers cannot match.The belt-drive system has an easy-to-adjust tension device.By using a spring system, the risk for over tensioning is eliminated, ensuring a long belt life and excellent performance during the season.For easy service and maintenance, the deck can be rotated into the vertical locked service position.Deep-deck design increases airflow so more material can be processed.Operator can trim with either side.Dual side trimming increases operator productivity.1-in. to 6-in. (2.5-cm to 15.2-cm) cutting heights, in 0.5-in. (1.3-cm) increments, allow the operator to match all mowing conditions.Gauge wheels, rollers, or side-mounted skid shoes lift the deck over uneven surfaces for a well-groomed appearance.Double-captured anti-scalp wheels provide increased durability.Easy lift and lock system for service purposes.Standard semi-pneumatic caster tires will not go flat when punctured.Spindles can be greased without removing belt shields.1-in. (2.5-cm) cold-forged spindles are strong for long life.Heat-treated to provide additional strengthCertified to European (CE) standards72-in. (152-cm) 7-Iron PRO Side-Discharge Mower Deck72-in. 7-Iron Pro Side-Discharge Mower DeckFeatures include:Blade tip speed of 18,000 fpm (5486 m/min) for more blade strikes per inch mowed.Redesigned front baffle manages airflow and controls clippings better.Spindle pocket reinforcement gives even greater structural durability.Blade spindle housings are made of ductile cast iron.Gusseted design puts reinforcement where it is needed.Adjustable anti-scalp wheels help smooth out the mowing job.Standard semi-pneumatic caster tires will not go flat from punctures.The mower is designed to provide exceptional cut quality at higher travel speeds:The mower deck is stamped from 7-gague, 0.179-in. (4.6-mm) steel to minimize the number of welds and provide a smooth underside, with fewer sharp corners, for reduced material buildup.Provides precision components and long deck lifeSingle piece of steel means no welds to breakProvides a smooth underside, without corners, reducing material buildup0.75-in. (1.9-cm) solid steel bar is welded to mower deck perimeter for added strength.The rounded corners of the stamped deck help distribute impact stress to reduce the potential of damage when the mower contacts trees, rocks, curbs, and other fixed obstacles.A deep-deck design of 5.5-in. (14-cm) delivers excellent airflow so material can be processed quickly and efficiently.1-in. to 6-in. (2.5-cm to 12.7-cm) cutting heights, in 0.5-in. (1.3-cm) increments, allow the operator to match all mowing conditions.Unique baffling system allows grass to stand up before being cut, producing a uniform length and appearance:Baffling system eliminates clumping, blowout, and windrowing.Wide discharge opening provides even clipping dispersal for an excellent, finished appearance in all conditions.72-in. (183-cm) Fastback Mower Deck72-in. Fastback Mower DeckThe 72-in. (183-cm) rear-discharge mower deck is ideally suited for:Areas where people are presentSchoolsParksPlaygroundsTraffic areas (city boulevards, roadsides, etc.)Conditions and applications:Areas with long grass and weedsAreas where customer is not as concerned about having a wide dispersal of grass (park areas, roadsides, etc.)Government bids that specify a rear discharge mower.Key features of the 72-in. (183-cm) Rear-Discharge Mower Deck include:Mower deck is constructed of 7-gauge, 0.179-in. (4.6-mm) steel for the strength to stand up to the demanding use of commercial and municipal mowing applications.Blade spindle housings are made of ductile cast iron.Gusseted design puts reinforcement where it is needed.Deck is constructed with a patented baffling system that reduces clumping and windrowing andproduces a finished appearance that competitive rear-discharge mowers cannot match.The belt-drive system has an easy-to-adjust tension device.By using a spring system, the risk for over tensioning is eliminated, ensuring a long belt life and excellent performance during the season.For easy service and maintenance, the deck can be rotated into the vertical locked service position.Deep-deck design increases airflow so more material can be processed.Operator can trim with either side.Dual side trimming increases operator productivity.1-in. to 6-in. (2.5-cm to 15.2-cm) cutting heights, in 0.5-in. (1.3-cm) increments, allow the operator to match all mowing conditions.Gauge wheels, rollers, or side-mounted skid shoes lift the deck over uneven surfaces for a well-groomed appearance.Double-captured anti-scalp wheels provide increased durability.Easy lift and lock system for service purposes.Standard semi-pneumatic caster tires will not go flat when punctured.Spindles can be greased without removing belt shields.1-in. (2.5-cm) cold-forged spindles are strong for long life.Heat-treated to provide additional strengthCertified to European (CE) standards72-in. (183-cm) 7-Iron V-Flex Commercial Side Discharge Mower Deck72-in. 7-Iron V-Flex DeckThe 72-in. (183-cm) 7-Iron V-Flex Mower Deck is suitable for those who need a rotary deck capable of following the undulations and mounding in rough or uneven areas: Golf coursesSports facilitiesParks and recreation facilitiesMunicipalities The V-Flex deck is constructed of 7-gauge, 0.179-in. (4.6-mm) steel:Added strength to stand up to the demanding uses on the golf course. The deck has a patented vertical belt drive system, which allows for the deck to articulate 20 degrees above and below center. This design also allows for belts to stay clean and prevents the belt from stretching and twisting when flexing.Mower deck specifications  60-in. (152-cm) 7-Iron PRO Side-Discharge62-in. (157-cm) Fastback Rear-Discharge72-in. (183-cm) 7-Iron PRO Side-Discharge72-in. (183-cm) Fastback Rear-Discharge72-in. (183-cm) 7-Iron V-Flex Side-DischargeGauge (thickness)7 gauge, 0.179 in. (4.6 mm)7 gauge, 0.179 in. (4.6 mm)7 gauge, 0.179 in. (4.6 mm)7 gauge, 0.179 in. (4.6 mm)7 gauge, 0.179 in. (4.6 mm)Cutting height1 to 6 in.  (2.5 to 15.2 cm)1 to 6 in.  (2.5 to 15.2 cm)1 to 6 in.  (2.5 to 15.2 cm)1 to 6 in.  (2.5 to 15.2 cm)1 to 6 in.  (2.5 to 15.2 cm)Caster wheel typeSemi-pneumaticSemi-pneumaticSemi-pneumaticSemi-pneumaticPneumaticGauge wheelsYes, front and rearYes, front and rearYes, front and rearYes, front and rearYes, front and rearDeck oscillation relative to ground plane+/- 15 degrees+/- 15 degrees+/- 15 degrees+/- 15 degrees+/- 15 degreesLateral deck tilt+/- 8 degrees+/- 8 degrees+/- 8 degrees+/- 8 degrees+/- 8 degreesDeck installed at factoryNoNoNoNoNoTime required for one person to install or remove deck (without tools)10 minutes10 minutes10 minutes10 minutes10 minutesTime to change height of cut3 minutes without tools3 minutes without tools3 minutes without tools3 minutes without tools3 minutes without toolsBelt typeKevlar beltKevlar beltKevlar beltKevlar beltKevlar beltBelt shield typePlasticPlasticPlasticPlasticPlasticBelt shield time to remove or install2 minutes or less2 minutes or less2 minutes or less2 minutes or less2 minutes or lessBlade typeHigh liftMedium liftHigh liftMedium liftHigh liftBlade tip speed18,000 fpm (5,486 m/min)16,000 fpm (4,877 m/min)18,000 fpm (5,486 m/min)16,000 fpm (4,877 m/min)16,800 fpm (5,122 m/min)Spindles33333Spindle-housing materialDuctile cast ironDuctile cast ironDuctile cast ironDuctile cast ironCenter – aluminum, outside – cast-iron gearboxDeck level laterally when raisedYesYesYesYesYesDischargeSideRearSideRearSideMowing width60 in. (152 cm)62 in. (157 cm)72 in. (183 cm)72 in. (183 cm)72 in. (183 cm)Overall width (chute down)74 in. (188 cm)64 in. (163 cm)86 in. (218 cm)74 in. (188 cm)86 in. (218 cm)Weight—————60-in. (152-cm) 7-Iron PRO Side-Discharge Mower Deck60-in. 7-Iron PRO Mower Deck60-in. 7-Iron PRO Mower DeckFeatures include:Blade tip speed of 18,000 fpm (5486 m/min) for more blade strikes per inch mowed.Redesigned front baffle manages airflow and controls clippings better.Blade spindle housings are made of ductile cast ironGusseted design puts reinforcement where it is needed.Spindle pocket reinforcement gives even greater structural durability.Adjustable anti-scalp wheels help smooth out the mowing job.Standard semi-pneumatic caster tires will not go flat from punctures.The mower is designed to provide exceptional cut quality at higher travel speeds:The mower deck is stamped from 7-gauge, 0.179-in. (4.6-mm) steel to minimize the number of welds and provide a smooth underside, with fewer sharp corners, for reduced material buildup.Provides precision components and long deck lifeSingle piece of steel means no welds to breakProvides a smooth underside, without corners, reducing material buildup0.75-in. (1.9-cm) solid steel bar is welded to mower deck perimeter for added strength.The rounded corners of the stamped deck help distribute impact stress to reduce the potential of damage when the mower contacts trees, rocks, curbs, and other fixed obstacles.A deep-deck design of 5.5-in. (14-cm) delivers excellent airflow so material can be processed quickly and efficiently.1-in. to 6-in. (2.5-cm to 12.7-cm) cutting heights, in 0.5-in. (1.3-cm) increments, allow the operator to match all mowing conditions.Unique baffling system allows grass to stand up before being cut, producing a uniform length and appearance:Baffling system eliminates clumping, blowout, and windrowing.Wide discharge opening provides even clipping dispersal for an excellent, finished appearance in all conditions.

    Front mower seat has standard arm rests for added comfort and productivity

    Deluxe comfort seatOperator comfort enhances productivity. The open station TerrainCut™ Front Mowers can be equipped with three seat options that have features and adjustments to make most any operator comfortable. Deluxe comfort seatSeat with fore-aft adjustment to accommodate both tall and short operatorsStandard adjustable armrestsOther comfort features include:Standard cup holderNoise level meets North American and European standardsTwo factory-installed seat options are available for extra comfort for long-day productivity.

    Serviceability is designed-in to reduce maintenance cost and increase uptime

    Engine hoodLarge screened area of engine hoodHood latchEngine hood includes large screened area:Minimizes the amount of material that can get to the cooling radiatorsMinimizes the need to clean the hood screens Hood latch keeps the hood securely in place, providing an optimum seal:A single hood latch is located on top of the hood behind the seat.Engine hood opens to the rearDesigned-in service accessibilityDesigned-in service accessibility helps ensure daily maintenance is completed to keep the machine operating at peak performance. The hood opens rearward, exposing the following:EngineOil and fuel filterHydraulic oil coolerRadiator check/fillThe hood can be totally removed, if necessary. The seat flips forward for access to air filter, fuse bank, engine oil dipstick, and front of engine.Condenser release knobCondenser tilted back to permit cleaningEasy-to-turn knobs are provided to release the air conditioning condenser (1575 and 1585 only) and fuel and hydraulic oil coolers so they can be tilted back to permit thorough cleaning between them and the engine coolant radiator.Foot platform access panelRemovable foot platformThe panel on the foot platform can be removed for access to the transaxle, PTO shaft, and most linkages. Easy-to-read daily service decal is located on the bottom of the foot platform panel:Provides access to easily hook up driveshaft when changing implementsMakes it more likely service will be performed at the optimum time, thus ensuring the highest level of performance and uptimePanel on foot platform removedRemoval of the foot platform gives convenient access to the driveshaft that powers the mower deck, snow blower and rotary broom:Helps make changing from one front implement to another easier and more convenient Hydraulic hoses have reusable O-ring seal (ORS) fittings:ORS fittings seal at a lower torque to prevent leaks.Fittings can be removed from a damaged hose and installed on another hose.Downtime and cost for repairs are reduced considerably.Rotate For Service™ (RFS) feature shownRFS service lockout latchRFS feature provides access for cleaning and maintenance of the mower decks:The service-latch pin allows mower deck to lock into position to ensure deck is held in position for cleaning or service.The top-greaseable spindle grease fittings can be accessed without removing the belt covers. 

    Front mower ballast requirements

    Front mowers must be properly ballasted for both good performance and safe operation. Ballast requirements differ depending on the front mower model and the implement being used.The chart below gives the minimum ballast requirements for the various product configurations. Additional ballast is recommended for operating on slopes or other conditions that may warrant it.NOTE: Use only implements and accessories recommended by the manufacturer. Front mowers and current (model year 2015 and later) implementsTerrainCut™ 1500 Series Front MowersProduct Configuration60-in. (152-cm) Side-Discharge Deck (7-Iron™ PRO) 72-in. (183-cm) Side-Discharge Deck (7-Iron PRO)62-in. (157-cm) Rear-Discharge Mower Deck72-in. (183-cm) Rear-Discharge Mower Deck72-in. (183-cm) 7-Iron V-Flex Deck60-in. (152-cm) HD Front Blade47-in. (119-cm) HD Two-Stage Snow Blower60-in. (152-cm) HD Two-Stage Snow Blower 60-in. (152-cm) Rotary Broom43-in. (109-cm) Drop Spreader (Order Zone)1550 Front Mower 2WD1*2*1*2*NA***02*3*1*NA***1550 Front Mower 4WD01*01*NA***02*2*0Wide track1570 Front Mower 2WD1*2*1*2*6*02*3*1*NA***1570 Front Mower 4WD01*01*6*02*2*0Wide track1575 Front MowerNarrow track + 4 *Wide track + 5*Narrow track + 1 wheel weight on each side** + 3 weights* or wide track + 3 weights*Wide track + 6*Wide track + 6*1*NA***6*Wide track + 1 wheel weight on each side** + 3 weights*With 60-in. Rotary Broom: wide track + 2 wheel weight on each side** or with 60-in. Snow Blower: wide track1580 Front Mower01*01*6*0NA***2*0Wide track1585 Front MowerNarrow track + 4*Wide track + 5*Narrow track + 1 wheel weight on each side** + 3 weights* or wide track + 3 weights*Wide track + 6*Wide track + 6*1*NA***6*Wide track + 1 wheel weight on each side** + 3 weights*With 60-in. Rotary Broom: wide track + 2 wheel weight on each side** or with 60-in. Snow Blower: wide track1400 and 1500 Series II Front Mowers1420 Series II Front Mower 0  2* 1*4*  NA***6*  4* 6*6* NA*** 1435 Series II Front Mower0  2* 1* 4* NA***6*  4* 6*6* NA*** 1445 Series II Front Mower0  2* 1* 4* 6*6*  4* 6*6* NA*** 1545 Series II Front Mower0  2* 1*4*  6* 6* NA*** 6*6* NA*** 1565 Series II Front Mower0 2* 1* 4* 6*6*  NA*** 6* 6*NA***1575/1585 Cab models: Rim design allows for tire assembly to be mounted in two different configurations, a narrow track or wide track width to meet ballast requirements.*42-lb (19-kg) (R66949) Quik-Tatch weight (installation requires TCB10303, rear weight mounting kit).**50-lb (23-kg) front wheel weight(s) required (installation requires BM17985, mounting hardware kit).***NA – Not recommended for use on front mower.NOTE: Ballast requirements may change. Always refer to the implement owner’s manual for the appropriate ballast requirements.  Front mowers and model year 2014 and prior implements1400 and 1500 Series II Front MowersProduct Configuration60-in. (152-cm) Side-Discharge Deck (7-Iron™ and 7-Iron II)  72-in. (183-cm) Side-Discharge Deck (7-Iron and 7-Iron II)62-in. (157-cm) Rear-Discharge Mower Deck72-in. (183-cm) Rear-Discharge Mower Deck72-in. (183-cm)7-Iron V-Flex DeckMCS 600 Hydraulic DumpSoft cabHard cab60-in. (152-cm) HD Front Blade47-in. (119-cm) HD Two-Stage Snow Blower60-in. (152-cm) HD Two-Stage Snow Blower60-in. (152-cm) Rotary Broom1420 Series II Front Mower01*01*NA0006*4*6*6*1435 Series II Front Mower01*01*NA0006*4*6*6*1445 Series II Front Mower01*01*3*0006*4*6*6*1545 Series II Front MowerNA1*NA1*3*0006*NA6*6*1565 Series II Front MowerNA1*NA1*3*0006*NA6*6*1500 TerrainCut Front Mowers1550 Front Mower 2WD1*2*1*2*NANANANA02*3*1*1550 Front Mower 4WD0 1*01*NANANANA02*2*01570 Front Mower 2WD1* 2*1*2*6*NANANA02*3*1*1570 Front Mower 4WD0 1*01*6*NANANA02*2*01575 Front MowerNarrow track + 4*Wide track + 5*Narrow track 1 wheel weight on each side** + 3 weights* or wide track + 3 weights*Wide track + 6*Wide track + 6*NANANA1*  NA 6*Wide track 1 wheel weight on each side** + 3 weights*1580 Front Mower01*01*6*NANANA0NA2*01585 Front MowerNarrow track + 4*Wide track + 5*Narrow track 1 wheel weight on each side** + 3 weights* or wide track + 3 weights*Wide track + 6*Wide track + 6*NANANA1*NA6*Wide track 1 wheel weight on each side** + 3 weights*1575/1585 Cab models: Rim design allows for tire assembly to be mounted in two different configurations, a narrow track or wide track width, to meet ballast requirements.* 42-lb (19-kg) (R66949) Quik-Tatch weight (requires TCB10303, rear weight mounting kit).** 50-lb (23-kg) front wheel weight(s) required (installation requires BM17985, mounting hardware kit).NA – Not recommended for use on front mower.NOTE: Ballast requirements may change. Always refer to the implement owner’s manual for the appropriate ballast requirements.   

  • Key Specs
    Engine Manufacturer/model
    3TNV80F
    Engine Power
    Gross PS, 24.2 hp
    17.8 kW
    Fuel tank capacity
    16 U.S. gal.
    60.6 L
    Mower deck Size
    60, 72 in.
    152, 183 cm
    Blade tip speed
    18,000 fpm
    5,486 m/min
    Transmission
    Hydrostatic 2WD, optional full time or on demand 4WD
    Speed range
    0-12 mph
    0-19.3 km/h
    Drive wheels
    23×10.5-12, Optional: 23×8.5-12
    Caster wheels
    Flat free, 11×4-5
    Warranty
    24 monhts
    Engine
    Manufacturer/model
    3TNV80F
    Power
    Gross
    PS, 24.2 hp
    17.8 kW
    Rated engine rpm
    3,000 rpm
    Cylinders
    Three
    Displacement
    77 cu in.
    1.26 L
    Maximum torque
    At 1,900 rpm, 47.2 lb-ft
    64 Nm
    Injection
    Indirect
    Fuel type
    Diesel (optional kit permits B20 compatibility)
    Fuel tank capacity
    16 U.S. gal.
    60.6 L
    Cooling
    Liquid
    Cooling capacity
    7.5 U.S. qt
    7.1 L
    Air cleaner
    Dual element dry type
    Air restriction indicator
    Standard
    Charging system
    Automotive type
    Alternator, amp
    75 amp
    Battery
    12 V
    Drivetrain
    Transmission
    Hydrostatic 2WD, optional full time or on demand 4WD
    Speed and direction control
    Two-pedal foot
    Cruise control
    Optional
    Hi/Lo range
    No, single speed transmission
    Travel speed
    Hi forward
    0-12 mph
    0-19.3 km/h
    Hi reverse
    0-5 mph
    0-8 km/h
    4-wheel drive
    Hydraulics
    Type
    Open center
    Pump capacity
    5.1 U.S. gpm
    19.3 L/min
    Spool valve
    Front lift, standard
    Lift cylinders
    Two
    Steering
    Type
    Hydraulic cylinder
    Turns lock-to-lock
    2 maximum, 1.5 minimum
    Brakes
    Type
    Internal wet disk
    Individual turn brakes
    Standard
    Master brake
    Standard, locking
    Buyer's notes
    Warranty
    24 months
    Tires
    Drive wheels
    23×10.5-12, Optional: 23×8.5-12
    Steering
    18×8.5-8 (2WD), 18×8.5-10 (4WD)
    Weight transfer
    Type
    Optional hydraulic
    Dimensions
    Wheelbase
    49.2 in.
    125 cm
    Ground clearance
    6.5 in.
    16.5 cm
    Length
    Less mower deck, 86.7 in.
    220.2 cm
    Overall width
    With 23×10.5 tires, 51.7 in.
    131.3 cm
    ROPS
    Standard (folding)
    ROPS certification
    2-POST: OSHA 1928; Canadian Std.: CSA-352; 4-POST: SAE J2194; EU Standard: 86/298/EEC; ISO 21299:2009
    Overall height with ROPS
    82.7 in.
    210 cm
    Overall height with ROPS folded
    58 in.
    147 cm
    Shipping weight
    Net weight, 2wd without mower or fuel, 1,675 lb
    760 kg
    Net weight, 4wd without mower or fuel, 1,835 lb
    832 kg
    Mower decks
    Construction
    One-piece stamped: 7-Iron PRO
    Deck thickness
    7 gauge
    0.18 in.
    4.6 mm
    Size
    60, 72 in.
    152, 183 cm
    Deck offset
    Yes
    Cutting height
    1-6 in.
    2.54-15.24 cm
    Belt tensioning
    Spring loaded
    Blade tip speed
    18,000 fpm
    5,486 m/min
    Caster wheels
    Type
    Flat free
    Size
    11×4-5
    Front anti-Scalp rollers
    Yes, gauge wheels
    Rear anti-scalp rollers
    Yes, gauge wheels
    Mower deck (rear discharge)
    Cutting width
    62, 72 in.
    157, 183 cm
    Cutting height
    1-6 in.
    2.5-15.2 cm
    Caster wheels
    Type
    Flat free
    Size
    11×4-5
    Additional information
    Date collected
    21-June-2019