John Deere - 2025R
List price: $14,655
Ribbon Icon
Special Offers
View Details
John Deere - 2025R

John Deere 2025R Compact Utility Tractor (Price reflects tractor base only.)

Request More Information

  • This field is for validation purposes and should be left unchanged.
  • Durable, efficient, high-torque 3-cylinder diesel engine provides adequate power

    3-cylinder Yanmar TNV Series diesel enginePower is provided by a durable and efficient high-torque three-cylinder Yanmar® TNV Series diesel engine. This series of engines was developed to meet Tier 4 Environmental Protection Agency (EPA) environmental requirements by featuring low levels of both exhaust and emissions. ModelNumber of cylindersEngine displacementGross engine hpPower take-off (PTO) hp2025R31.267 L24.2 18.0Yanmar TNV Series engine offers these features:Economical for good cooling and long lifeIsolated engine provides reduced vibration and noise for the operator; indirect fuel injection uses a precombustion chamber to give the engine a smooth and quiet operation; aluminum-alloy piston with built-in steel struts are lightweight to reduce connection rod bearing loads and provide good heat transfer characteristicsDesign permits tighter tolerances and neutralizes expansion of the piston, thereby reducing blow-by gas and less noise from the piston slapHigher top rings on the piston and a thinner head gasket greatly reduces the volume of unburned waste gases and increases combustion efficiencyTiming-gear teeth have a designed roll-off profile giving almost no clash,no noise, and no backlashHigh-torque reserve provides plenty of power under heavy load, yet retains excellent fuel economyEasy access to engine check and fill points on the right-hand side of the tractor by removing the side panelsFuel filter with replaceable elementFull-pressure lubrication system provides filtered oil under pressure to all vital engine partsGlow plugs provide quick starts in temperatures down to 18°C (0°F) (Optional engine coolant heater attachment will assist starting under more extreme conditions.)Auto-bleed fuel system means there is no special bleeding required if the tractor runs out of fuel; this system will self-prime the injection pump, lines, and injectors, providing fast fuel recoveryKey start and shut off eliminates fuel shut-off knobElectric solenoid shuts fuel supply off immediately when key is turned offSee-through coolant recovery tank permits operator to check coolant level without removing radiator capDry-type air cleaner with safety element keeps dirt and other contaminants out of the engineSafety element (second filter) will protect engine if primary filter would develop a leakProtects engine when servicing primary filterAir filter restriction indicator is standard equipment on the 2025R TractorSealed-radiator compartment keeps trash and debris on outside of hoodHorizontal exhaust discharges fumes away from the operator station, reducing noise and improving operator visibility and comfortYanmar is a trademark of Yanmar Company Limited.

    Factory-installed mechanical mower deck lift components reduces dealer initial mower deck install

    2025R TractorThe 2025R model includes factory-installed mechanical deck lift components.The addition of these components from the factory significantly reduces the time required to do the initial mower deck installation at the time of purchase.Refer to the mowers and material collection page for more details on mower deck installation and compatibility.

    Optional iMatch™ Quick-Hitch feature allows for easy implement hookup

    iMatch Quick-HitchiMatch Quick-Hitch with rotary cutter hookupiMatch Quick-Hitch (LVB25976)iMatch Quick-Hitch with rotary cutter hookup (LVB25976)One of the greatest operator concerns involves difficulty in attaching tractor implements. John Deere has addressed this issue with the iMatch Quick-Hitch.The iMatch Quick-Hitch provides easy hookup and a guaranteed fit for all Category 1 implements that are designed to meet the ASABE Category 1 Standard S278.6 for quick-attach hitches.All implements require a set of bushings in order for the attachment to fit and work properly with the iMatch Quick-Hitch. One set of bushings comes with the iMatch Quick-Hitch.NOTE: The bushing set can be seen in the picture above. These bushings allow the hooks on the iMatch and the pins on the implement to fit together properly. All other implements (box blades, tillers, rear blades, etc.) will require a set of bushings to enlarge the pin to fit with the iMatch hooks. Bushings of different lengths can be found in the parts system or through a bushing supplier (see dimensions below).Upper bushingInside diameter: 1.93-1.95 cm (0.76-0.77 in.)Outside diameter: 3.15-3.18 cm (1.24-1.25 in.)Lower bushingsInside diameter: 2.24-2.26 cm (0.88 to 0.89 in.)Outside diameter: 3.63-3.66 cm (1.43 to 1.44 in.)

    Superb serviceability improves productivity

    Regular service and maintenance are essential to the performance, productivity, and longevity of the tractor.Two quarter-turn fasteners allow operators to easily remove the engine side panels without tools to access to the engine compartmentThe under-hood gas-lift support provides easy access to the engine compartment and eliminates the need for a mechanical prop rodExternal hood latch requires no tools and can release using the tractor keyEasy access to regular service points minimizes service timeDaily service checks, such as checking the engine oil or water separator, can be done without opening the hood or removing the tractor side panelsTractors are equipped with a mechanical air filter restriction indicator that alerts the operator when the air filter needs to be cleaned or changedAll external engine, fuel and transmission filters are easily accessibleFuel tank is located on the rear of the tractor to allow for easy access when fuelingNOTE:  Always refer to the operator’s manual for complete maintenance and service recommendations.

    Implement compounding improves efficiency

    Implement compounding (2025R Tractor shown)Loader, mid-mower, and a variety of rear hitch implements can be attached to the tractor at the same timeOptional premium independent mid lift system operates independent of the rear 3-point hitch. This gives the operator the flexibility to leave the mid mower attached when completing other tasks.

    Premium independent mower lift system allows quick and easy adjustment

    The optional premium independent lift system has been improved over the current 1 Family system by now allowing the operator to have full control of the mower deck in both the raise and lower positions. When the operator reaches the desired height, the button can be released and the deck will hold its position. This feature reduces the effort required to adjust the height-of-cut (HOC) dial and it also allows for quick height changes on the go.

    Easy-to-use hydrostatic transmission (HST) increases efficiency

    The 2R Series are equipped with a two-range hydrostatic transmission (HST) incorporated in a die-cast aluminum transmission case. Fluid under pressure transmits engine power to the drive wheels via a closed-loop pump and motor arrangement. Infinite ground speeds allow the operator to match the speed of the tractor to the job.No clutching for fast and easy direction changesTwin Touch™ foot pedals for quick and easy forward/reverse operationTransmission oil cooler cools transmission oil for longer transmission lifeSafety features of the HST include:The tractor will only start with the range lever in neutralIf the range lever is in gear when the key is turned to the start position, the instrument panel instructs the operator to shift to neutralThe engine will shut off if the operator leaves the seat and the forward/reverse pedals are depressedTwin Touch foot controls Two-range transmissionTwo-speed transmissionTransmission has two speeds – hi and lo range.The range lever is located next to the seat, conveniently within reach of the operatorAll tasks can be performed using two ranges on the 2025R which means less shifting throughout the dayDurability features include:Large forged one-piece trunnion shaft with larger support bearings that reduce vibration and noiseInnovative transaxle combines an HST, gear reduction axle, and clutchPressure side filtration allows the use of a fine-mesh filterOne pump to supply charge pressure and implement A flow divider splits the flow to various circuits throughout the tractor.The transaxle has an oil cooler which provides improved hydraulic cooling performance

    Open operator's station is comfortable and convenient

    Open operator’s stationThe operator’s station has been designed to allow for greater operator comfort and increased visibility. The ergonomic layout and convenient color coded controls with large labels allow for easy identification and operation. Large and easy to grab handrails are located on each fender for an easier on and off of the tractor from either side. Below are other key features of the 2025R Tractor operator’s station:       Sloping hood design provides improved visibilityPlenty of room for comfortable operationCup holder, multiple storage compartments, and a 12-V outlet ensures an organized operator’s stationFender-mounted handrails are large and easy to grab, assist the operator in getting on and off the tractorRubberized floor mat design to reduce vibration and noiseStep-through operator platform makes getting on and off the tractor easyFront-horizontal exhaust for increased operator visibilityControls have been raised and integrated into the fender for operator comfort and ease of useLarge, easy-to-read decals provide clear instructions for experienced and even non-experienced operatorsPortable toolbox integrated into the front frame of the tractorFuel tank is located on the rear of the tractor to allow for easy access when fuelingLeft-side stepThe left-side step allows for easy access on and off the tractorFoot platform has non-skid surfacePremium seatThe thick, soft padding on this seat provides a smooth and comfortable ride. A high, scalloped back makes it easier for the operator to turn to view rear implements.Seat adjusts fore/aft for operator convenienceSeat flips forward for protection from the elementsHigh seat back and armrests are in base equipment and allow for a more comfortable operationRetractable seat belt feature prevents the seat belt from becoming tangled in the seat suspension and controlsKey features of the operator’s station include:Tilt steering wheel design in base equipment on the 2025R TractorAllows the operator to adjust the steering wheel to the most comfortable positionProvides additional clearance for the operator to enter and exit the tractorProvides easy return to the fully raised positionProvides plenty of room for comfortable operationEasy-fold rollover protective structure (ROPS) allows the tractor to be used or stored in low-clearance environmentsLightingStandard lighting shownOptional premium lighting shownStandard equipment lighting includes:Two front-mounted sealed-beam halogen headlightsTwo amber-flashing warning/hazard lights mounted on the side of the rollover protective structure (ROPS) with reflectorsTwo additional fender lights are standard on the 2025RAdditional front- and rear-light kits are availableFor those operators requiring additional lighting, additional light options are available:Premium light kitTwo light-emitting diode (LED) fender lightsTwo LED ROPS work lights (adjustable 360 degrees for forward or rear lighting)One LED rear PTO lightAuxiliary rear work lightOne halogen lightForward halogen work light kitContains two ROPS mounted lightsForward LED work light kitContains two ROPS mounted lightsNOTE: Lights mounted to the ROPS will require the warning light brush guard kit.  Optional work light brush guards can ordered to protect lights from debris.

    Fast and easy implement changeover offers versatility

    Front Quik-Tatch™ hitch makes changing front implements quick and easyAll front implements (blades, brooms, and snow blowers) use a common hitchAutoConnect™ Mid-Mount Mower Deck, 120R Loader, and 260B Backhoe can be taken on or off within 5 minutes, and no tools are requiredChanging rear implements is a snap with the iMatch™ Quick-Hitch, which has three fixed points to back in and pick up a rear implement that is iMatch™ compatible

  • Engine
    Engine model
    Engine power (gross)
    17.8 kW
    23.9 hp
    SAE J1995 rated power
    Power take-off (PTO) power
    13.4 kW
    18 hp
    Rated engine speed
    3200 rpm
    Injection pump type
    Indirect injection
    Emissions compliance
    Final Tier 4
    3 / 1.267 L
    3 / 77 cu in.
    Number of cylinders
    Cylinder liners
    Bore and stroke
    80 x 84 mm
    3.2 x 3.3 in.
    Compression ratio
    Cooling system
    Water pump
    Air cleaner
    Dual element
    Engine torque at rated speed
    53 Nm
    39.09 lb-ft
    Fuel tank capacity
    23.8 L
    6.3 gal.
    Battery size
    500 CCA
    Alternator (12-V)
    40 amp
    Starter size
    1.2 kW
    1.6 hp
    Fuel system
    Indirect injection
    Fuel consumption
    5.8 L/hr
    1.5 U.S. gal./hr
    Standard transmission; forward/reverse
    Hydrostatic – 2 range
    Left-hand reverser
    Final drive
    Spur Gear
    Wet disc
    Power steering
    Axle capacity
    612 kg
    1349 lbRear
    1100 kg
    2425 lb
    Cruise control
    Differential lock
    Open center
    Pump rated output
    13.25 L/min
    3.5 gpmImplement
    13.25 L/min
    3.5 gpm
    26.5 L/min
    7.0 gpm
    Pump type
    Maximum operating pressure
    148.2 bar
    2150 psi
    Draft control sensing
    Position control
    Remote control valves available
    3-point hitch
    Limited Category 1
    Lift capacity, 24-in. behind link arms
    400 kg
    882 lb
    Power take-off (PTO)
    Rear – 540 rpm
    Mid – 2100 rpm
    Wet disc
    Brake (for mid and rear PTO)
    Wet disc
    Fluid capacities
    Crankcase with filter
    2.7 L
    2.9 qt
    Final drive
    Spur Gear
    Differential lock
    Operator station
    Rollover protective structure
    Platform – flat/straddle
    Three-piece semi flat
    Gear shift location – console/floor
    Left-hand side
    1600 mm
    63 in.
    Front axle clearance
    316 mm
    12.5 in.
    Turning radius without brakes
    2.65 m
    8.7 ft
    Limited slip differential
    Approximate shipping weight (open-station; cab)
    813.5 kg
    1793.4 lb
    R3 Turf – 23×8.50-12
    R4 Industrial – 23×8.50-12
    R3 Radial – 220/55-R12
    R3 Turf – 31×13.5-15
    R4 Industrial – 12-16.5
    R3 Radial – 280/70-R16
    Front tread range
    95.3 cm
    37.5 in.
    Tilt steering wheel
    12-V Outlet
    Additional information
    Date collected
  • Simple Tractor Buying Cash Price

    Offer valid on new 2025R Compact Tractor purchases made between February 1, 2020 – April 30, 2020. Our Simple Tractor Buying Cash price for a John Deere 2025R Tractor is $14,655 with standard rate financing. Price reflects the tractor base only. Taxes, freight, set up and delivery charges could increase the monthly payment. Price and model availability vary by dealer. Valid only at participating 4Rivers Equipment dealers. Some restrictions apply, see dealer for details.