Topcon DT-200 Digital Theodolite

• Laser pointer through the scope
• Extremely low power consumption
• Waterproof and dustproof
• RS232C data I/O port
• Operates on 4 AA batteries

Make your next job a snap
With Topcon’s DT-200 you’ll be up and working fast, thanks to its simple interface and large, easy-to-see backlit LCD. There’s an optical plummet that makes set up over a control point easy, and a tilt sensor that provides ±3 minute angle
correction. The DT-200 Series features two magnification choices – 26x and 30x, a super-short 3 ft. minimum focus distance for those tight areas, and angle accuracies of 5, 7, and 9 arc seconds.

Laser pointer
Add a whole new dimension of accuracy and confidence to your alignment jobs with Topcon’s unique DT-200L Series featuring a red Class II laser beam. Use it anywhere on your site and see clearly in direct sunlight up to 165 ft. Now you can easily and accurately place anchor bolts at regular intervals on a line, set an angle, and use the beam to verify your tape measure is properly aligned for the next stake, or “sight in” footers, frames, and tilt-up walls.

The ultimate in continuous operation
The DT-200/DT-200L Series provides up to 170 hours of operation in Angle Measurement mode on 4 AA batteries, better than any other model. When it is time to change batteries, it’s as easy as snapping out the old ones and snapping in the new. When using the laser, power consumption is low, providing up to 45 hours of continuous operation.

Precise angles with digital data collection. With digital readout and tough, all-weather construction, Topcon theodolites provide long battery life, super-short minimum focus, and your choice of angle accuracies.

The DT-200 series integrates the same high-quality advanced absolute circle reading technology found in Topcon high-performance total station products for high accuracy field calculations.

• IP66 water and dust protection
• Compact and lightweight
• Long-life 140 hour battery
• Absolute H & V angle encoder
• High accuracy (2″, 5”, 7” and 9” models) measurements

With our DT-200 you’ll be up and working fast, thanks to its simple interface and large, easy-to-see backlit LCD. There’s an optical plummet that makes set up over a control point easy, and a tilt sensor that provides ±3 minute angle correction.

With a range of angular accuracies available, only Topcon can offer the precision, durability, and advanced technology found in the DT-200 series.

https://www.topconpositioning.com/sites/default/files/product_files/dt-200_broch_7010_0630_revg_sm_0.pdf